| 贴片式滴灌带安装 |
| 添加时间：2019/7/16 14:09:03 浏览次数： |
| 贴片式滴灌带安装 Installation of patch drip irrigation belt 滴灌用水一般经过首部枢纽稳压、过滤、施肥，再通过干管、支管，最后由滴灌带滴到植物的根部。 Drip irrigation water generally passes through the first hub to regulate pressure, filter and fertilize, then through the main pipe and branch pipe, and finally drips from the drip irrigation belt to the root of the plant. 滴灌带的安装分以下几个步骤进行: Installation of drip irrigation belts is carried out in the following steps: 1、在支管上打孔 1. Punching holes in branch pipe 滴灌带的安装方式滴灌带的安装方式 Installation Method of Drip Irrigation Belt 在PE管，PVC管，输水带支管上先用专用打孔工具进行打孔。 In PE pipe, PVC pipe and branch pipe of water conveyance belt, special punching tool is used to punch first. 2、输水管与滴灌带相连 2. Connection of water conveyance pipe with drip irrigation belt 如图所示，用专用旁通将输水支管与滴灌带连在一起。 As shown in the figure, the water diversion branch pipe is connected with drip irrigation belt by special bypass. 3、清洗与封头 3. Cleaning and Heading 滴灌带与输水管按照步骤1、2安装完毕后要打开输水阀门进行冲洗，将系统及滴灌带中存留的杂质颗粒冲洗掉，最后将滴灌带尾端翻卷两折，用剪断的滴灌带头将末端封住。也可以直接使用堵头直接封住. After installation of drip irrigation belt and water conveyance pipe in step 1 and 2, the water conveyance valve should be opened for flushing. The impurity particles remaining in the system and drip irrigation belt should be flushed out. Finally, the end of drip irrigation belt should be rolled up and folded twice, and the end of drip irrigation belt should be sealed with a cut drip irrigation head. It can also be sealed directly with a plug. |
| 上一页 喷灌系统类型 |
| 下一页 贴片式滴灌带安装 |